Products

Aplus 22: Lightweight Brick Plaster

Multifunctional lightweight brick plaster

Aplus 22 Plaster ALC is a mortar for plastering, bricklaying, and screeding used for interior and exterior areas.

Standard Reference: EN 998:2003

Advantage:

  • Multifunction product for bricklaying, plastering, and screeding

  • Practical, easy, and fast application that can save working time

  • High adhesion and plasticity when used

  • Prevent spots, damp, and mold caused by hairline cracks

  • Thin application, which can save mortar usage

  • Suitable for all bricks

Discover more solutions from Aplus for your building needs.

Coverage:

  • Red brick : ± 1.25 m² / 40 kg / 10 mm thick
  • Concrete brick : ± 3.50 m² / 40 kg / 10 mm thick
  • Red brick plaster : ± 2.0 m² / 40 kg / 10 mm thick
  • ALC/concrete brick plaster : ± 2.1 m² / 40 kg / 10 mm thick
  • Screed : ± 2.0 m² / 40 kg / 10 mm thick
  • Packaging 40 kg : Water requirement 5.5 – 7.0 liters

  1. Clean the wall and floor surfaces (for floor leveling) from dust, dirt, moss, oil, grease, and any particles that could interfere with or reduce adhesion
  2. Pour 5.5 – 7 liters of water into a container for each 40 kg bag
  3. Add Aplus ALC 22 Plaster into the water-filled container
  4. Mix the solution thoroughly using a mixer
  5. Check the area to be worked on, ensuring the surface is level and suitable for plastering or flooring
  6. Wet the surface of lightweight blocks and create reference marks for a plaster thickness of ±10 mm
  7. Apply the mixture evenly, then level the plaster surface with a flat trowel
  8. Smooth the plaster using a flat trowel for an even finish
  9. After 24 hours, the wall can be coated with Aplus Acian 110, Aplus Acian 300, Aplus Skim Coat 111, Aplus Skim Coat 112, or Aplus Skim Coat 111-S